From: Sami (sy1977@gmail.com)
Date: Tue Jun 20 2006 - 08:00:54 ART
Hi Petr,
Rebooted SW1 and SW2 , looks it working after reboot ... 3550 behaves like
windows .. strange !!!!
Thanks for your prompt reply
-Sami
On 6/20/06, Sami <sy1977@gmail.com> wrote:
>
> Petr,
>
> STP doesn't work show spanning tree vlan 56 shows all the ports are in
> forwarding state and I can't ping from R5 to R6 which is in VLAN 56. after
> removing this VACL everything is fine ,I can ping , STP start working and
> port 13 and 14 goes into bloking state.
>
> I looked in solution guide , doing exactly same configuration but still
> things doesn't work.
>
> Thanks
>
>
>
>
> On 6/20/06, Petr Lapukhov <petr@internetworkexpert.com> wrote:
> >
> > Sami,
> >
> > exactly what does not work.
> >
> > I've just loaded Lab 11, it work fine for me.
> >
> > STP, IP, ARP run smoothly, IPX is dropped :)
> >
> > --
> > Petr Lapukhov, CCIE #16379
> > petr@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com <http://www.internetworkexpert.com/>
> > Toll Free: 877-224-8987
> > Outside US: 775-826-4344
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART