From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Mon Jun 19 2006 - 17:25:42 ART
Hi Chris
When triggered extensions to RIP are enabled, routing updates are sent on
the WAN only if one of the following events occurs:
.The router receives a specific request for a routing update. (Full database
is sent.)
.Information from another interface modifies the routing database. (Only
latest changes are sent.)
.The interface comes up or goes down. (Partial database is sent.)
.The router is first powered on, to ensure that at least one update is sent.
(Full database is sent.)
IMHO Triggered extensions should be enabled on both sides
Thanks
Victor.
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
Guzman, Chris
Enviado el: Lunes, 19 de Junio de 2006 03:51 p.m.
Para: ccielab@groupstudy.com
Asunto: RIP Triggered Updates
Does RIP triggered updates need to be enabled on both ends of WAN link ?
Or is it possible to only enable on one end of the link. In testing in
a lab, sh ip protocols does indicate the RIP Triggered is enabled,
however routes are still be sent to multicast address. Also what are
the events that would cause a triggered update?
Thanks
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART