From: Sami (sy1977@gmail.com)
Date: Sat Jun 17 2006 - 15:42:23 ART
Group,
I am not sure it's a typo or may be I am missing something here. While
reading doc cd it says Traffic shaping and policing not supported on CBWFQ
but this in policy map policing and shaping is allowed..
am I missing something here ?
------------------
Configuring CBWFQ on a physical interface is only possible if the interface
is in the default queueing mode. Serial interfaces at E1 (2.048 Mbps) and
below use WFQ by defaultother interfaces use FIFO by default. Enabling
CBWFQ on a physical interface overrides the default interface queueing
method. Enabling CBWFQ on an ATM PVC does not override the default queueing
method.
If you configure a class in a policy map to use WRED for packet drop instead
of tail drop, you must ensure that WRED is not configured on the interface
to which you intend to attach that service policy.
*Traffic shaping and policing are not currently supported with CBWFQ. *
*------------*
-Sami
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART