From: Feras Abunamous \(fabunamo\) (fabunamo@cisco.com)
Date: Sat Jun 10 2006 - 18:10:21 ART
Check your mtu size on the vlan and use the ip os mtu-ignore on both
ends. It may help.
Feras Abunamous
Systems Engineer
Data-Center Central Area
Cisco Systems, Inc.
Office: 773-695-8008
Pager: 630-336-7243
cell: 630-336-7243
Cisco Systems, CEC Home
fabunamo@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sami
Sent: Saturday, June 10, 2006 3:46 PM
To: ccielab@groupstudy.com
Subject: OSPF debug
Group,
I am having problem in OSPF adjaceny between
R2------SW1----------R3
I am getting following error when I enable debug...what could be the
issue ?
06:44:27: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
--More--
06:44:32: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
--More--
06:44:37: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
--More--
06:44:42: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
--More--
06:44:47: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
--More--
06:44:52: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
--More--
06:44:57: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART