From: Daniel Fredrick (dfredrick@gmail.com)
Date: Sat Jun 10 2006 - 18:31:52 ART
What state is it stuck in... when you do a show ip ospf nei?
On 6/10/06, Feras Abunamous (fabunamo) <fabunamo@cisco.com> wrote:
>
> Check your mtu size on the vlan and use the ip os mtu-ignore on both
> ends. It may help.
>
> Feras Abunamous
> Systems Engineer
> Data-Center Central Area
> Cisco Systems, Inc.
> Office: 773-695-8008
> Pager: 630-336-7243
> cell: 630-336-7243
> Cisco Systems, CEC Home
>
> fabunamo@cisco.com
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Sami
> Sent: Saturday, June 10, 2006 3:46 PM
> To: ccielab@groupstudy.com
> Subject: OSPF debug
>
> Group,
>
> I am having problem in OSPF adjaceny between
>
>
> R2------SW1----------R3
>
> I am getting following error when I enable debug...what could be the
> issue ?
>
> 06:44:27: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
> aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
> --More--
> 06:44:32: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
> aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
> --More--
> 06:44:37: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
> aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
> --More--
> 06:44:42: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
> aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
> --More--
> 06:44:47: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
> aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
> --More--
> 06:44:52: OSPF: rcv. v:2 t:1 l:48 rid:2.2.2.2
> aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
> --More--
> 06:44:57: OSPF: rcv. v:2 t:1 l:48 rid:3.3.3.3
> aid:0.0.0.3 chk:4A9F aut:0 auk: from Vlan11
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART