From: Scott Morris (swm@emanon.com)
Date: Fri Jun 09 2006 - 13:31:03 ART
I agree with Zero, that the whole answer would depend on the way the
question was actually worded.
While both are methods of shaping, taken out of context could lead to
completely different conclusions and operations there! One is per-pvc while
the other is per-class of traffic. One is shown to give us a mincir, one is
shown as simple shaping to that rate.
I don't think there's enough detail as given to really hazard more than a
guess there!
Just my thoughts.
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ZeroFlash
Sent: Friday, June 09, 2006 11:50 AM
To: 'Mike O'; ccielab@groupstudy.com
Subject: RE: FRTS vs new way
I would say it depends on the requirement that is being asked of you. If
they ask for traffic shaping I personally wouldn't shape the traffic using a
policy map. I would go with frame-relay traffic shaping.
As for your answer being correct.
I wouldn't think so because you are shaping to a bandwidth of 384k with a
burst of 48k. The solutions guide isn't pointing to that but without knowing
what the question is can't really say.
Can you post the question for us, then can give you a better answer.
Thanks
ZeroFlash
CCIE #16217
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Mike
O
Sent: Friday, June 09, 2006 9:36 AM
To: ccielab@groupstudy.com
Subject: FRTS vs new way
I did a lab one way and the solution is being presented in another. But does
my way work the same?
Solution guide:
class-map HTTP
match access-group 101
policy-map 501
class HTTP
bandwidth percent 80
int s0/0
frame-relay traffic-shaping
int s0/0.501
frame-relay class 501
map-class frame-relay 501
frame-relay mincir 384000
service-policy output 501
access-list 101 permit tcp any eq 80 any
My way:
map-class HTTP
match address 101
policy-map 501
class HTTP
priority percent 80
policy-map IN_HTTP
class class-default
shape average 384000 48000
service-policy 501
int s0/0.501
service-policy input IN_HTTP
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART