From: Feras Abunamous \(fabunamo\) (fabunamo@cisco.com)
Date: Thu Jun 08 2006 - 19:30:12 ART
Sorry, I meant the ip multicast rate limit?
Feras Abunamous
Systems Engineer
Data-Center Central Area
Cisco Systems, Inc.
Office: 773-695-8008
Pager: 630-336-7243
cell: 630-336-7243
Cisco Systems, CEC Home
fabunamo@cisco.com
-----Original Message-----
From: Feras Abunamous (fabunamo)
Sent: Thursday, June 08, 2006 5:27 PM
To: Faryar Zabihi (fzabihi); 'ccielab@groupstudy.com'
Subject: RE: Restricting multicast traffic in frame-relay.
How is that different than using the ip multicast boundary?
Feras Abunamous
Systems Engineer
Data-Center Central Area
Cisco Systems, Inc.
Office: 773-695-8008
Pager: 630-336-7243
cell: 630-336-7243
Cisco Systems, CEC Home
fabunamo@cisco.com
-----Original Message-----
From: Faryar Zabihi (fzabihi)
Sent: Thursday, June 08, 2006 5:26 PM
To: Feras Abunamous (fabunamo); 'ccielab@groupstudy.com'
Subject: RE: Restricting multicast traffic in frame-relay.
Match multicast add range
-----Original Message-----
From: Feras Abunamous (fabunamo)
Sent: Thu Jun 08 17:21:26 2006
To: ccielab@groupstudy.com
Subject: RE: Restricting multicast traffic in frame-relay.
Can you someone tell me how do we use class map to limit the multicast?
Is there a port that we should match?
Feras Abunamous
Systems Engineer
Data-Center Central Area
Cisco Systems, Inc.
Office: 773-695-8008
Pager: 630-336-7243
cell: 630-336-7243
Cisco Systems, CEC Home
fabunamo@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ivan
Sent: Thursday, June 08, 2006 8:05 AM
To: ccielab@groupstudy.com; Leigh Harrison
Cc: ELDHO PAUL
Subject: Re: Restricting multicast traffic in frame-relay.
Why not ip multicast rate-limit ?
> Hi there,
>
> On the frame config there is the option to apply a class map.
>
> You could put a nested policy in there restricting multicast flows to
> only 64k
>
> LH
>
> ELDHO PAUL wrote:
> > Hi,
> > Again I've a question on frame-relay.
> >
> > *R6's DLCI 622 operates between 384 kbps and 512 kbps. Ensure that
R6
> > never sends more than 64 kbps of multicast streams into this DLCI.
Do
> > not configure any policy maps or access lists*.
> >
> > Is there any special way to treat the multicast traffic otherthan
> > configuring mincir.
> >
> > Regards,
> > Eldho.
> >
> >
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART