From: Joel Desaulniers (joeldesaulniers@gmail.com)
Date: Thu Jun 08 2006 - 13:48:27 ART
You can look at this in both ways. Personally I encountered a similar task
in IEWB (lab 4) and the solution was to change the bandwidth on the slower
link to 10 Meg, which inserted 2 equal cost routes in the route table.
Joel Desaulniers, CCNP, JNCIA-SSL, Network+
Network Analyst
On 6/8/06, Sami <sy1977@gmail.com> wrote:
>
> Group,
>
> Again , I would like to ask experts what is the best practise and what
> approach is better in real lab exam ..task says load balance traffic over
> FR
> and ethernet link..OSPF is running on both the links..ip ospf cost command
> is not allowed.. I changed the bandwidth of ethernet interface to
> 1.544MBand load balancing is fine .
>
> Now my question ...should I change bandwidth of serial to 10 MB or change
> bandwidth of ethernet to 1.544 MB ?
>
> It's all up to whether you see glass half full or half empty , although I
> always see glass half full.
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Joel Desaulniers Network Analyst CCNP, CCNA
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART