From: Duncan Maccubbin (duncan.maccubbin@earthlink.net)
Date: Wed Jun 07 2006 - 21:58:54 ART
End to End keepalives.
map-class frame-relay Framecloud
frame-relay end-to-end keepalive bidirectional
frame-relay end-to-end keepalive timer send 15
frame-relay end-to-end keepalive timer receive 15
int s0/0.1
frame-relay interface-dlci 16
frame-relay class Framecloud
-----Original Message-----
>From: Godswill Oletu <oletu@inbox.lv>
>Sent: Jun 7, 2006 8:32 PM
>To: ELDHO PAUL <cciein2006@gmail.com>, ccielab@groupstudy.com
>Subject: Re: Advanced Frame-Relay Features
>
>hmmmmmm....
>
>The only thing that will come close is....
>
>IP SLA or RTR on R6 & R8, poll the other router's ip address every 15
>seconds, and then use MD5 authentication for the IP SLA monitor control
>message:
>
>Something like....
>
>!
>ip sla monitor key-chain SLA
>ip sla monitor 1
> type echo protocol ipIcmpEcho 1.1.1.2
> frequency 15
>!
>ip sla monitor schedule 1 start-time now life forever
>!
>key chain SLA
> key 1
> key-string CISCO
>!
>!
>
>HTH
>Godswill Oletu
>
>----- Original Message -----
>From: "ELDHO PAUL" <cciein2006@gmail.com>
>To: <ccielab@groupstudy.com>
>Sent: Wednesday, June 07, 2006 2:01 PM
>Subject: Advanced Frame-Relay Features
>
>
>> Hi,
>>
>> While doing a CCIE scinario on frame-relay configuration I came across a
>> question which says,
>> **
>> *"Enable the R6-R8 frame connection to operate under the following
>> conditions:
>>
>> - Support for 128-bit MD5 authentication.
>>
>> - R6 and R8 are to poll each other every 15 seconds to ascertain the other
>> side's ability to transmit into the frame cloud."*
>> **
>> Can anyone advice me how to do it.
>>
>> Regards,
>> Eldho.
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART