From: Godswill Oletu (oletu@inbox.lv)
Date: Wed Jun 07 2006 - 21:32:43 ART
hmmmmmm....
The only thing that will come close is....
IP SLA or RTR on R6 & R8, poll the other router's ip address every 15
seconds, and then use MD5 authentication for the IP SLA monitor control
message:
Something like....
!
ip sla monitor key-chain SLA
ip sla monitor 1
type echo protocol ipIcmpEcho 1.1.1.2
frequency 15
!
ip sla monitor schedule 1 start-time now life forever
!
key chain SLA
key 1
key-string CISCO
!
!
HTH
Godswill Oletu
----- Original Message -----
From: "ELDHO PAUL" <cciein2006@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, June 07, 2006 2:01 PM
Subject: Advanced Frame-Relay Features
> Hi,
>
> While doing a CCIE scinario on frame-relay configuration I came across a
> question which says,
> **
> *"Enable the R6-R8 frame connection to operate under the following
> conditions:
>
> - Support for 128-bit MD5 authentication.
>
> - R6 and R8 are to poll each other every 15 seconds to ascertain the other
> side's ability to transmit into the frame cloud."*
> **
> Can anyone advice me how to do it.
>
> Regards,
> Eldho.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART