From: Pierre-Alex (paguanel@hotmail.com)
Date: Sat Jun 03 2006 - 07:31:27 ART
1. Has anybody played around with flex links and vlan-move?
According to the documentation you have to configure a VLAN ID which is the
lowest VLAN ID on the interface ???.
" Configure a physical Layer 2 interface (or port channel), as part of a Flex
Link pair with the interface. The MAC address-table move update VLAN is the
lowest VLAN ID on the interface. [...] Configure a physical Layer 2 interface
(or port channel) and specify the VLAN ID on the interface, which is used for
sending the MAC address-table move update. "
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225see/scg/swflin
k.htm
2. The example is absolutely confusing but reading through the line what I can
see is that I need to do the following:
a. Enable redundancy:
switchport backup interface interface-id
b. Configure preemption (optional)
switchport backup interface interface-id preemption mode [forced | bandwidth |
off]
c. configure mac table move
switchport backup interface interface-id mmu primary vlan vlan-id (??)
mac address-table move update transmit
Any help or suggestion welcome
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:31 ART