From: Nouman Ahmed Khan (nouman.khan@mis.com.sa)
Date: Sat Jun 03 2006 - 07:25:30 ART
Hi,
No need to use the following commands on the access ports,
sw encap dot1q
sw mode trunk
ur IP Phone and PC will work without these commands .The switch is
intelligent enough to sense the data and voice VLANS .No need for trunking
on access ports.
Nouman khan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Albert Ip
Sent: Saturday, June 03, 2006 12:29 PM
To: ccielab@groupstudy.com
Subject: Voice VLAN and data VLAN configuration
Hi All,
Please help me clarify the following configuration is
correct or not, thanks!!!
Voice vlan 200
Data vlan 100
Config on port f0/13
#
vlan 100
name VLAN_Data
vlan 200
name VLAN_Voice
#
int f0/13
sw encap dot1q
sw mode trunk
sw voice vlan 200
sw access vlan 100
#
Please kindly advise, thanks!!!!
Albert
_______________________________________
YM - Bw=u0T.'
4N:b'A(S&3$W:t!A'A*:*B$M$4%i%H/d$U0T.'59'A!A7m'A$W:t.I4N/`%_'Y,](l!A%t&s;!8\
3#IN(+%"!C
http://messenger.yahoo.com.hk
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:31 ART