Re: EIGRP K-values

From: James Ventre (messageboard@ventrefamily.com)
Date: Mon May 29 2006 - 18:00:03 ART


The (Minimum) MTU is not considered in metric calculation. Minimum MTU
is carried in advertisements though.

James

CCIEin2006 wrote:

  Fair enough..but I cannot tell where MTU plugs into the equation...

  On 5/29/06, James Ventre <messageboard@ventrefamily.com> wrote:

>Thanks but this does not really tell you that K2 is the metric
    for load

    Yes, it does. But it requires you to look at the equation and
    understand it, rather than just memorizing tidbits. Look at the
    snippit surrounding K2.

    (K2 * Bandwidth)/(256-load)

    If K2 is 0 ..... then outcome of that equation will always be
    ZERO (in fractions .... zero over anything is always zero), which
    means that the load value is never considered. A Non-Zero value
    means the outcome will not be NON-ZERO, thus making a difference.

    James

    CCIEin2006 wrote:

      Thanks but this does not really tell you that K2 is the
      metric for load. I need something like this: K1 - Bandwidth
      K2 - LoadK3 - DelayK4 - ReliabilityK5 - MTU I'm not sure if
      the above values are correct but I would like to have
      something along those lines.
      On 5/29/06, James Ventre <messageboard@ventrefamily.com >
      wrote:

        Set K2 to 1 if you want it to consider load.
        http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009405c.shtml#rise

        Metric = [K1 * Bandwidth + (K2 * Bandwidth)/(256-load) +
        K3*Delay] *
        [K5/(reliability + K4)]

        The default constant values are K1 = K3 = 1 and K2 = K4 =
        K5 = 0.

        James

        CCIEin2006 wrote:
> Hello,
>
> Is there a quick command to find out what eigrp
        K-values pertain to the
> different metrics i.e. bandwidth delay reliability load
        MTU?
>
> Or is this on the documentation CD? I can't find it.
>
> I would like to have a quick reference so that if asked
        on the exam to
> include load and mtu in the EIGRP calculation I would
        know which K-values to
> tweak.
>
> Thanks!
>
>
        _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART