From: CCIEin2006 (ciscocciein2006@gmail.com)
Date: Mon May 29 2006 - 17:00:51 ART
Thanks but this does not really tell you that K2 is the metric for load. I
need something like this:
K1 - Bandwidth
K2 - Load
K3 - Delay
K4 - Reliability
K5 - MTU
I'm not sure if the above values are correct but I would like to have
something along those lines.
On 5/29/06, James Ventre <messageboard@ventrefamily.com> wrote:
>
> Set K2 to 1 if you want it to consider load.
>
>
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009405c.
shtml#rise
>
>
> Metric = [K1 * Bandwidth + (K2 * Bandwidth)/(256-load) + K3*Delay] *
> [K5/(reliability + K4)]
>
> The default constant values are K1 = K3 = 1 and K2 = K4 = K5 = 0.
>
> James
>
>
>
>
>
>
> CCIEin2006 wrote:
> > Hello,
> >
> > Is there a quick command to find out what eigrp K-values pertain to the
> > different metrics i.e. bandwidth delay reliability load MTU?
> >
> > Or is this on the documentation CD? I can't find it.
> >
> > I would like to have a quick reference so that if asked on the exam to
> > include load and mtu in the EIGRP calculation I would know which
> K-values to
> > tweak.
> >
> > Thanks!
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART