From: James Ventre (messageboard@ventrefamily.com)
Date: Mon May 29 2006 - 16:54:59 ART
Set K2 to 1 if you want it to consider load.
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009405c.shtml#rise
Metric = [K1 * Bandwidth + (K2 * Bandwidth)/(256-load) + K3*Delay] *
[K5/(reliability + K4)]
The default constant values are K1 = K3 = 1 and K2 = K4 = K5 = 0.
James
CCIEin2006 wrote:
> Hello,
>
> Is there a quick command to find out what eigrp K-values pertain to the
> different metrics i.e. bandwidth delay reliability load MTU?
>
> Or is this on the documentation CD? I can't find it.
>
> I would like to have a quick reference so that if asked on the exam to
> include load and mtu in the EIGRP calculation I would know which K-values to
> tweak.
>
> Thanks!
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART