Re: FR DE

From: Evgeniy Voloshin (e.voloshin@equant.ru)
Date: Fri May 26 2006 - 03:57:58 ART

• Next message: Jai Prakash: "Re: serial interfaces"
• Previous message: chris Iannacone: "serial interfaces"
• Maybe in reply to: Faryar Zabihi \(fzabihi\): "FR DE"
• Next in thread: Petr Lapukhov: "Re: FR DE"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Group,

I have a simmilar question but about fe-de list/group:
I have this configuration:
!
frame-relay de-list 1 interface Serial0/0
frame-relay de-list 1 protocol ip list 150
!
interface Serial0/0
 no ip address
 encapsulation frame-relay
 load-interval 30
 frame-relay de-group 1 102
 no frame-relay inverse-arp
 frame-relay lmi-type ansi
!
access-list 150 deny tcp any any eq www
access-list 150 deny tcp any eq www any
access-list 150 permit ip any any

So I do not understand what for this command - frame-relay de-list 1
interface:
interface type One of the following interface types: serial, null, or
ethernet.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_r/frcmds/wrffr1.htm#wp1018321

Is it work only with egress traffic form Serial0/0?

---
Yev.

• Next message: Jai Prakash: "Re: serial interfaces"
• Previous message: chris Iannacone: "serial interfaces"
• Maybe in reply to: Faryar Zabihi \(fzabihi\): "FR DE"
• Next in thread: Petr Lapukhov: "Re: FR DE"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART