From: Petr Lapukhov (petrsoft@gmail.com)
Date: Fri May 26 2006 - 04:07:19 ART
Evgeniy,
AFAIK "de-list" works fine with *process-switched* traffic. So it will
mark correctly all the *locally generated packets* (like OSPF)
but all the fast/cef switched traffic is not marked by de-list/group,
unless you disable "route-cache" at input interface
HTH
Petr
2006/5/26, Evgeniy Voloshin <e.voloshin@equant.ru>:
>
> Hi Group,
>
> I have a simmilar question but about fe-de list/group:
> I have this configuration:
> !
> frame-relay de-list 1 interface Serial0/0
> frame-relay de-list 1 protocol ip list 150
> !
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> load-interval 30
> frame-relay de-group 1 102
> no frame-relay inverse-arp
> frame-relay lmi-type ansi
> !
> access-list 150 deny tcp any any eq www
> access-list 150 deny tcp any eq www any
> access-list 150 permit ip any any
>
>
> So I do not understand what for this command - frame-relay de-list 1
> interface:
> interface type One of the following interface types: serial, null, or
> ethernet.
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_
r/frcmds/wrffr1.htm#wp1018321
>
> Is it work only with egress traffic form Serial0/0?
>
> ---
> Yev.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART