From: Elias Chari (elias.chari@gmail.com)
Date: Wed May 24 2006 - 08:35:43 ART
Hi Group,
First posting returned an error from the server. Apologies if any of you
have received this twice.
Thanks
Elias
On 5/24/06, elias.chari@gmail.com <elias.chari@gmail.com> wrote:
>
> Hi group,
>
> I am having some trouble with interface dampening and do not actually
> agree/understand the solution given in the workbook which is:
>
> int f0/0
> dampening 30
>
> Objective: Assuming we want to remove an interface which flaps 3 times in
> 30 sec from the routing table and allow the router to bring it in service.
>
> I have discussed this with another two friends also studying for their
> CCIE and our opinions vary, so here it is.
>
> My view is that all dampening values should stay in the defaults with the
> exception of the Half Life and Suppress Value which should be increased to
> 30 (not 100% sure about this) & 3000 respectively.
>
> something like
>
> int f0/0
> dampening 30 1000 3000 20
>
> Note:
>
> dampening <half-life 1-30 sec> <re-use value 1-20000> <Suppress 1-20000>
> <max duration to suppress 1-255>
>
> Half-life - default 5
> Reuse - default 1000
> Suppress - default 2000
> Max ST - default 20
>
> What is your view?
>
> Thanks
> Elias
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART