Re: Proper way to apply area filter-list?

From: CCIEin2006 (ciscocciein2006@gmail.com)
Date: Tue May 23 2006 - 17:28:41 ART

• Next message: devecchio: "RE: Passed at San Jose"
• Previous message: Jeffrey Fry: "RE: How can I permit or deny even and odd subnets?"
• Maybe in reply to: CCIEin2006: "Proper way to apply area filter-list?"
• Next in thread: Jason Brown: "Re: Proper way to apply area filter-list?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Any ideas guys?

On 5/22/06, CCIEin2006 <ciscocciein2006@gmail.com> wrote:
>
> Folks,
>
> Given the following example:
>
> Area0---(R1)---Area1---(R2)
>
> If I were to filter routes coming from Area0 to Area1 logic would dictate
> using an outbound area filter-list on R1 for Area1.
> However when I tried this on my gear it did not work.
>
> But when I applied the filter-list inbound on R1 for Area1 it worked.
>
> Is the logic here to filter routes from going INBOUND to the OSPF
> database?
>
> Please let me know the proper usage for this command because I find the
> Cisco documentation examples are not clear.
>
> Thanks.

• Next message: devecchio: "RE: Passed at San Jose"
• Previous message: Jeffrey Fry: "RE: How can I permit or deny even and odd subnets?"
• Maybe in reply to: CCIEin2006: "Proper way to apply area filter-list?"
• Next in thread: Jason Brown: "Re: Proper way to apply area filter-list?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART