tip to remember port numbers when in the lab

From: lim es (tiga72@yahoo.com)
Date: Mon May 22 2006 - 10:47:47 ART

• Next message: CCIEin2006: "Proper way to apply area filter-list?"
• Previous message: Brian McGahan: "RE: sparse-mode without configuring RP !!"
• Next in thread: Brian McGahan: "RE: tip to remember port numbers when in the lab"
• Maybe reply: Brian McGahan: "RE: tip to remember port numbers when in the lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Group,

R6(config)#priority-list 1 protocol ip low udp ?
  <0-65535> Port number
  biff Biff (mail notification, comsat, 512)
  bootpc Bootstrap Protocol (BOOTP) client
(68)
  bootps Bootstrap Protocol (BOOTP) server
(67)
  discard Discard (9)
  dnsix DNSIX security protocol auditing
(195)
  domain Domain Name Service (DNS, 53)
  echo Echo (7)
  isakmp Internet Security Association and Key
Management Protocol
                 (500)
===========

i used this method in case they ask u to build an
access-list but u cant remember the port no for that
protocol, but i know nbar has a similar command......i
just cant recall, any ideas?

TIA

Lim

• Next message: CCIEin2006: "Proper way to apply area filter-list?"
• Previous message: Brian McGahan: "RE: sparse-mode without configuring RP !!"
• Next in thread: Brian McGahan: "RE: tip to remember port numbers when in the lab"
• Maybe reply: Brian McGahan: "RE: tip to remember port numbers when in the lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART