From: Brandon Bennett (bennetb@gmail.com)
Date: Fri May 19 2006 - 16:07:00 ART
Two 8meg flash chips are required and depending on your ROM version
they may need to be intel.
An 8meg flash could be either two 4meg or a single 8meg as both
configurations work.
-Brandon
On 5/19/06, CCIEin2006 <ciscocciein2006@gmail.com> wrote:
> I was looking at purchasing cheap 2500's on ebay and then upgrading the
> flash to 16 meg.
>
> Can someone please answer the following:
>
> 1. Do you need to install two 8 meg flash chips to get 16 meg or can you
> install just one 16 meg flash?
>
> 2. If I were to purchase a 2500 with 8 meg flash would that 8 meg normally
> be a single 8 meg flash or two 4 meg flash? In the latter case I would be
> unable to use either for an upgrade to 16.
>
> And finally, do you have to upgrade the bios chip to upgrade the flash?
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART