From: marc fernandez (mag08036@yahoo.com)
Date: Tue May 16 2006 - 19:40:48 ART
I solved this one. Have to do sdm prefer
extended-match, save, and reload the switch. Then can
apply the ip policy route-map command on the SVI. The
switch has to be running at least 12.1.19-EA1a
--- marc fernandez <mag08036@yahoo.com> wrote:
> I have the following scenario with interface vlan2
> and
> interface vlan3. R1 is running ospf and bgp. SW1 is
> running OSPF, R2 is running OSPF and BGP, R3 is
> running OSPF and BGP. I do policy based routing on
> SW1
> to the prefixes advertised by R3 but R1 still can't
> reach them.
>
> Is it because you can't apply policy based routing
> on
> an SVI. Is there another method I could accomplish
> this?
>
> R1---(vlan2)---SW1-(vlan3)--R2---R3
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam
> protection around
> http://mail.yahoo.com
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART