Access-list Option in show traffic-s stat

From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Tue May 16 2006 - 19:05:54 ART

Hi List, just a simple question here,

 

Looking at this command show traffic-s stat there is an Option to set an
Access-list?

Can I set shaping for a particular traffic Flow?

 

Thanks

Victor.

 

Rack1R5(config-if)#do show access-list

Extended IP access list 123

    10 permit ip host 10.1.1.1 any (26 matches)

Extended IP access list TASK:QOS:8

    10 permit tcp any any eq 1720

    20 permit udp any any range 16384 32767

Rack1R5(config-if)#ip access-gr 123 in

Rack1R5(config-if)#do show traffic-sh stat

                  Acc. Queue Packets Bytes Packets Bytes Shaping

I/F List Depth Delayed Delayed Active

Se0/0 0 1 338 0 0 no

Se0/0 0 0 0 0 0 no

Se0/0 0 1 338 0 0 no

Se0/0.35 0 8 908 0 0 no

Se0/0.54 0 9 952 0 0 no

Rack1R5(config-if)#no ip access-gr 123 in

Rack1R5(config-if)#do show traffic-sh stat

                  Acc. Queue Packets Bytes Packets Bytes Shaping

I/F List Depth Delayed Delayed Active

Se0/0 0 3 1014 0 0 no

Se0/0 0 0 0 0 0 no

Se0/0 0 3 1014 0 0 no

Se0/0.35 0 26 2852 0 0 no

Se0/0.54 0 28 2940 0 0 no

This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART