RE: BGP Synchronization - When do OSPF and BGP router ID need

From: Magmax (magmax@bigpond.net.au)
Date: Sat May 13 2006 - 21:29:49 ART

Next message: Wang, Ting \(Taylor\): "RE: CEF and QoS, again"
Previous message: Nick Griffin: "Re: AS-path question"
Maybe in reply to: Victor Cappuccio: "RE: BGP Synchronization - When do OSPF and BGP router ID need"
Next in thread: Brian McGahan: "RE: BGP Synchronization - When do OSPF and BGP router ID need"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Can you tell me what kind of peer you have internal or external BGP

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CCIEin2006
Sent: Sunday, 14 May 2006 4:43 AM
To: ccielab@groupstudy.com
Subject: BGP Synchronization - When do OSPF and BGP router ID need to match?

Hello group,

Please examine the following setup:

10.1.1.0
  |
(R2)
  |
BGP
  |
(R1)---BGP---(R3)

All three routers are running ospf and iBGP with Synchronization enabled.
R1 is acting as route reflector for R2 and R3.

Will the 10.1.1.0 network advertised by R2 appear in the BGP table of R3?
If not please explain why.

Next message: Wang, Ting \(Taylor\): "RE: CEF and QoS, again"
Previous message: Nick Griffin: "Re: AS-path question"
Maybe in reply to: Victor Cappuccio: "RE: BGP Synchronization - When do OSPF and BGP router ID need"
Next in thread: Brian McGahan: "RE: BGP Synchronization - When do OSPF and BGP router ID need"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART