From: Ben (ccieben@cox.net)
Date: Fri May 12 2006 - 11:25:41 ART
Thanks for everyone's input - for me the solution ended up being to set
that one line's flowcontrol to "none" (I had the default for the range
set to hardware)
Ben
Ben wrote:
> Hi Ajaz,
>
> Just the CSS - I've tried the same physical port to other devices
> (such as a 2651xm) and it works just fine. That's what makes it so
> odd to me...
>
> My first thought is that it's a CSS problem... but I can access the
> SCM using my PC running SecureCRT (set at 9600/8/N/1) + a rollover
> cable (the type with the molded DB9 end).
>
> Ben
>
> Nawaz, Ajaz wrote:
>> Ben,
>>
>> Is it just the CSS giving you this problem and are you able reverse
>> telnet
>> to other Cisco devices properly with your original config?
>>
>> Ajaz
>>
>>
>>
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
>> Of Ben
>> Sent: 10 May 2006 00:58
>> To: Zahid Hassan
>> Cc: ccielab@groupstudy.com
>> Subject: Re: CSS11506 console w/ 2610XM NM-32A
>>
>> Zahid,
>>
>> Are you just running the octal cable directly to the CSS or are you
>> using
>> some sort of patch/rollover cable in line?
>>
>> Thanks!
>> Ben
>> Zahid Hassan wrote:
>>
>>> Ben,
>>>
>>>
>>> This works for me fine with the following line config:
>>>
>>> line 33 64
>>> session-timeout 10 no exec
>>> login authentication async
>>> transport input all
>>> line 97 112
>>> session-timeout 10 no exec
>>> login authentication async
>>> transport input all
>>>
>>>
>>> Regards,
>>>
>>>
>>> Zahid
>>>
>>>
>>> -----Original Message-----
>>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>>> Ben
>>> Sent: Tuesday, May 09, 2006 10:39 PM
>>> To: ccielab@groupstudy.com
>>> Subject: OT: CSS11506 console w/ 2610XM NM-32A
>>>
>>>
>>> Hi Group,
>>>
>>> Has anyone successfully setup their 2511 or 26xx with NM-32A to
>>> provide console access to their CSS11506/3/1?
>>>
>>> I can:
>>> 1.) Get access to the CSS11506 through a PC using a standard
>>> rollover console cable
>>> 2.) Use the existing port/patch cable (coupled together at a patch
>>> panel) on the NM-32A to connect to other devices using the
>>> 9600/8/N/1 settings
>>>
>>> When I connect the NM-32A, I can see data coming from the CSS when
>>> it boots - but I am not able to send responses back. No 'yes' or
>>> 'no' answers, no enter key.. nothing.
>>>
>>> line config:
>>>
>>> line 33 64
>>> exec-timeout 0 0
>>> no exec
>>> transport input all
>>> telnet break-on-ip
>>> telnet sync-on-break
>>> telnet ip-on-break
>>> flowcontrol hardware
>>>
>>> Ideas, thoughts? Might this be a cabling issue?
>>>
>>> TIA
>>>
>>> Ben
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>> -----------------------------------------
>> Information in this email including any attachments may be
>> privileged, confidential and is intended exclusively for the
>> addressee. The views expressed may not be official policy, but the
>> personal views of the originator. If you have received it in error,
>> please notify the sender by return e-mail and delete it from your
>> system. You should not reproduce, distribute, store, retransmit,
>> use or disclose its contents to anyone.
>>
>> Please note we reserve the right to monitor all e-mail
>> communication through our internal and external networks.
>>
>> SKY and the SKY marks are trade marks of British Sky Broadcasting
>> Group plc and are used under licence. British Sky Broadcasting
>> Limited (Registration No. 2906991), Sky Interactive Limited
>> (Registration No. 3554332), Sky-In-Home Service Limited
>> (Registration No. 2067075) and Sky Subscribers Services Limited
>> (Registration No. 2340150) are direct or indirect subsidiaries of
>> British Sky Broadcasting Group plc (Registration No. 2247735). All
>> of the companies mentioned in this paragraph are incorporated in
>> England and Wales and share the same registered office at Grant
>> Way, Isleworth, Middlesex TW7 5QD.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART