From: Ben (ccieben@cox.net)
Date: Wed May 10 2006 - 11:07:08 ART
Hi Ajaz,
Just the CSS - I've tried the same physical port to other devices (such
as a 2651xm) and it works just fine. That's what makes it so odd to me...
My first thought is that it's a CSS problem... but I can access the SCM
using my PC running SecureCRT (set at 9600/8/N/1) + a rollover cable
(the type with the molded DB9 end).
Ben
Nawaz, Ajaz wrote:
> Ben,
>
> Is it just the CSS giving you this problem and are you able reverse telnet
> to other Cisco devices properly with your original config?
>
> Ajaz
>
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Ben
> Sent: 10 May 2006 00:58
> To: Zahid Hassan
> Cc: ccielab@groupstudy.com
> Subject: Re: CSS11506 console w/ 2610XM NM-32A
>
> Zahid,
>
> Are you just running the octal cable directly to the CSS or are you using
> some sort of patch/rollover cable in line?
>
> Thanks!
> Ben
> Zahid Hassan wrote:
>
>> Ben,
>>
>>
>> This works for me fine with the following line config:
>>
>> line 33 64
>> session-timeout 10
>> no exec
>> login authentication async
>> transport input all
>> line 97 112
>> session-timeout 10
>> no exec
>> login authentication async
>> transport input all
>>
>>
>> Regards,
>>
>>
>> Zahid
>>
>>
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>> Ben
>> Sent: Tuesday, May 09, 2006 10:39 PM
>> To: ccielab@groupstudy.com
>> Subject: OT: CSS11506 console w/ 2610XM NM-32A
>>
>>
>> Hi Group,
>>
>> Has anyone successfully setup their 2511 or 26xx with NM-32A to provide
>> console access to their CSS11506/3/1?
>>
>> I can:
>> 1.) Get access to the CSS11506 through a PC using a standard rollover
>> console cable
>> 2.) Use the existing port/patch cable (coupled together at a patch
>> panel) on the NM-32A to connect to other devices using the 9600/8/N/1
>> settings
>>
>> When I connect the NM-32A, I can see data coming from the CSS when it
>> boots - but I am not able to send responses back. No 'yes' or 'no'
>> answers, no enter key.. nothing.
>>
>> line config:
>>
>> line 33 64
>> exec-timeout 0 0
>> no exec
>> transport input all
>> telnet break-on-ip
>> telnet sync-on-break
>> telnet ip-on-break
>> flowcontrol hardware
>>
>> Ideas, thoughts? Might this be a cabling issue?
>>
>> TIA
>>
>> Ben
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> -----------------------------------------
> Information in this email including any attachments may be
> privileged, confidential and is intended exclusively for the
> addressee. The views expressed may not be official policy, but the
> personal views of the originator. If you have received it in error,
> please notify the sender by return e-mail and delete it from your
> system. You should not reproduce, distribute, store, retransmit,
> use or disclose its contents to anyone.
>
> Please note we reserve the right to monitor all e-mail
> communication through our internal and external networks.
>
> SKY and the SKY marks are trade marks of British Sky Broadcasting
> Group plc and are used under licence. British Sky Broadcasting
> Limited (Registration No. 2906991), Sky Interactive Limited
> (Registration No. 3554332), Sky-In-Home Service Limited
> (Registration No. 2067075) and Sky Subscribers Services Limited
> (Registration No. 2340150) are direct or indirect subsidiaries of
> British Sky Broadcasting Group plc (Registration No. 2247735). All
> of the companies mentioned in this paragraph are incorporated in
> England and Wales and share the same registered office at Grant
> Way, Isleworth, Middlesex TW7 5QD.
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART