From: Evgeniy Voloshin (e.voloshin@equant.ru)
Date: Wed May 10 2006 - 03:59:59 ART
George,
is it misprint?:
R1:
===
router eigrp 5
redistribute eigrp 5 metric 10000 2000 255 1 1500
--- Yev.george stanza wrote:
team, I am dead-struck on a simple redistribution problem and i am not sure what is happening. The topology is as follows:: lo0 lo0 lo0 1.1.1.1 2.2.2.2 3.3.3.3 R4 <------->R1 <---------> R2 <-------> R3 e0 e1 e0 e1 e0 There is EIGRP 5 between R4 & R1 and there is EIGRP 6 between R1 & R2.. R1 has loopback 0 as 1.1.1.1 and R2 as 2.2.2.2 and so on.. Also, R1's Loop0 is in EIGRP 5 and R1's Loop1 (which is 100.100.1.1) is in EIGRP 6 >From R2, i am able to ping e1 of R1 but not the loopback or E0 of R1. The configuration is as follows (for R1)..any idea what i am missing here ?. R1: === router eigrp 5 redistribute eigrp 5 metric 10000 2000 255 1 1500 network 21.21.1.2 0.0.0.0 no auto-summary eigrp router-id 1.1.1.1 ! router eigrp 6 timers active-time 10 redistribute eigrp 5 metric 10000 2000 255 1 1500 network 100.100.1.1 0.0.0.0 network 21.21.10.5 0.0.0.0 no auto-summary eigrp router-id 100.100.1.1 ! _______________________________________________________________________ Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART