From: Anderson Mota Alves (mota_anderson@hotmail.com)
Date: Mon May 01 2006 - 22:38:00 ART
I haven't checked the forum, I will do this - Thanks..
--------------------------------------------------------------------
From: "Magmax" <magmax@bigpond.net.au>
To: "'Anderson Mota Alves'"
<mota_anderson@hotmail.com>,<ccielab@groupstudy.com>
Subject: RE: IEWB Lab 9 - Task 2.2
Date: Tue, 2 May 2006 11:31:15 +1000
>Did you look in IEWB discussion forum??
>
>http://forum.internetworkexpert.com/ubbthreads/ubbthreads.php?Cat=2
>
>Rack1R1(config)#int multilink 1
>Rack1R1(config-if)#
>*Mar 1 02:02:58.863: %LINEPROTO-5-UPDOWN: Line protocol on
Interface
>Multilink1, changed state to down
>Rack1R1(config-if)#
>
>
>Rack1R1#sh ver
>Cisco Internetwork Operating System Software
>IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(15)T16, RELEASE
SOFTWARE
>(fc2)
>Technical Support: http://www.cisco.com/techsupport
>Copyright (c) 1986-2005 by cisco Systems, Inc.
>Compiled Tue 19-Apr-05 12:23 by ssearch
>Image text-base: 0x80008098, data-base: 0x81D1B5FC
>
>ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)
>ROM: C2600 Software (C2600-JS-M), Version 12.2(15)T16, RELEASE
SOFTWARE
>(fc2)
>
>Rack1R1 uptime is 2 hours, 3 minutes
>System returned to ROM by power-on
>System image file is "flash:c2600-js-mz.122-15.T16.bin"
>
>cisco 2620 (MPC860) processor (revision 0x102) with 61440K/4096K
bytes of
>memory.
>Processor board ID
>M860 processor: part number 0, mask 49
>Bridging software.
>X.25 software, Version 3.0.0.
>SuperLAT software (copyright 1990 by Meridian Technology Corp).
>TN3270 Emulation software.
> --More--
>*Mar 1 02:03:24.403: %SYS-5-CONFIG_I: Configured from console by
console
>1 Ethernet/IEEE 802.3 interface(s)
>1 FastEthernet/IEEE 802.3 interface(s)
>2 Serial network interface(s)
>32K bytes of non-volatile configuration memory.
>32768K bytes of processor board System flash (Read/Write)
>
>Configuration register is 0x2102
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
>Anderson Mota Alves
>Sent: Tuesday, 2 May 2006 11:23 AM
>To: ccielab@groupstudy.com
>Subject: IEWB Lab 9 - Task 2.2
>
>Hi again, Task 2.2 which in the solution I saw that Multilink as
used, it
>may sounds a silly question but I'm asking it anyway. from the
solution
>we have: Interface Multilink1ip address 172.1.23.2 255.255.255.0ppp
>multilinkmultilink-group 1 I couldn't use the multilink-group 1 so I
used
>ppp multilink-group 1 I don't know if the command in solution is
wrong or
>my IOS version doesn't have it right IOS 12.4(5a) 2600 router.. Any
>comments are really appreciated,Andy
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
><< winmail.dat >>
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART