From: Anderson Mota Alves (mota_anderson@hotmail.com)
Date: Mon May 01 2006 - 22:18:14 ART
Hi Brians, I don't know if I'm wrong on this but I was having problems in
BGP in this lab because R1 was not seeing the bgp routes as best from R2
when I was issuing "show ip bgp" after some time I was able to figure it
out that the R2 was sending the bgp routes to R1 (iBGP) with a next-hop
of R6 (204.12.1.6) and then I realized that R1 didn't have the route of
204.12.1.0/24 installed on his route table so I had to go to R2 and
change one requirement from 4.8 (change the route-map CONNECTED_TO_OSPF
permit 10 matching not only the loopback but also the interface fa0/0 of
R2 (which is 204.12.1.2) only after this R1 start receiving the
204.12.1.0 routes from R2 and the BGP worked just fine. Please let me
know if I'm right or if I may be missing something here. Thanks,Andy
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART