From: Petr Lapukhov (petrsoft@gmail.com)
Date: Mon May 01 2006 - 09:24:17 ART
This is probably to simulate an RSVP reservation and verify
RSVP configuration.
I think that using "ip rsvp sender-host" "reservation host"
is more obvious for testing purposes :) I usually hang with
those two commands when debugging RSVP :)
HTH
Petr
2006/5/1, Ken <hpnkpn103@yahoo.co.jp>:
>
> Hi,
>
> In the solution guide for the Lab3 task 8.3, it has the following
> command.
>
> dial-peer voice 4 voip
> req-qos guarateed-delay
>
> Could any please explain what this number "4" refers to and why it is only
> necessary to configure dial-peer command on R4?
>
> Thanks,
> Ken
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART