From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon May 01 2006 - 14:26:38 ART
4 is just the locally significant number that is associated with
that dial peer for VoIP. FYI VoIP is not tested on in the R&S lab exam
any more so you don't need to worry about these dial-peer configs.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Ken
> Sent: Monday, May 01, 2006 7:08 AM
> To: Cisco certification
> Subject: IWEB Lab 3 Task 8.3
>
> Hi,
>
> In the solution guide for the Lab3 task 8.3, it has the following
> command.
>
> dial-peer voice 4 voip
> req-qos guarateed-delay
>
> Could any please explain what this number "4" refers to and why it is
only
> necessary to configure dial-peer command on R4?
>
> Thanks,
> Ken
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART