From: Shamin (ccie.xpert@gmail.com)
Date: Fri Apr 28 2006 - 07:19:01 GMT-3
Hi,
First of all my thanks to all you guys for your great inputs.
This is with reference to the IEWB LAB2 Ver3.0 Task 8.2
It is mentioned in the solution guide as follows ..
"Output queue calculations for the MQC are based on the configured
bandwidth value of the interface and not the speed the interface is
clocked at.Be sure to set the appropriate bandwidth value when
configuring the MQC on an interface"
As per this statement , what I understand is, when configuring MQC on
any interface, it is necessary that we configure the bandwidth command
on the main interface, even if it is not mentioned in the lab
requirements.
What confused me was that, for a similar task in LAB4 Ver3.0 Task 8.2,
there was no bandwidth configured under the main interface.
So i am bit confused here, My question will be, is it mandatory to
configure the banwidth command on the main interface for MQC, even if
it is not mentioned in the LAB requirements?
Regards
shamin
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:59 GMT-3