From: Akaradeth.N@datacraft-asia.com
Date: Thu Apr 27 2006 - 12:04:55 GMT-3
Hi GS,
I got the same problem, when use Auto-RP it doesn't work, only join-group on
R5 response to icmp ping but on R4 doesn't, but for BSR it works for the
same igmp join-group on both routers.
Anyone can explain us, thank you in advance.
Akaradeth
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]
Sent: Thursday, April 27, 2006 9:59 PM
To: ccielab@groupstudy.com
Subject: IEWB 3.0 Lab19 Mcast 6.1
Are there any scenarios where it is possible that Auto RP will not be
able to distribute the group to RP mappings utilizing sparse-mode, ip
pim autorp listener to all the necessary routers as BSR could? The
solution for IEWB Lab19 Sec 6.1 utilizes BSR, I didn't see any
indication why Auto RP could not be used, however I wasn't able to get
the Group to RP mappings propogated to R4. I don't see any indications
of RPF failures to the MA/RP. I'm at a loss why Auto RP will not achieve
the desired goal. Thoughts are appreciated.
NG
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:59 GMT-3