Re: challenge- configuring an isdn with rotary group

From: Victor (cain23@gmail.com)
Date: Mon Apr 24 2006 - 09:55:28 GMT-3


Very true I4ve been making test that4s why you see them as shutdown, but i
left them with no shutdown but still the same.
What do you with "interesting traffic"?
I typed the comand in all the bri4s : dialer rotary-group 1
but I don4t see that after in the config, I don4t know if this is normal, I
guess that if I do that the bri doesn4t need to be configured because it
uses the parameters from dialer 1 is that so?

2006/4/24, Ivan <ivan@iip.net>:
>
> Hello !
>
> I see that BRI0, BRI2, and BRI3 - shutdown. Also BRI1 haven't "interest
> traffic".
>
> > Hi if you can help me with this I owe you a big one!
> > I have to configure 4 bri to 4 bri in the other end, so I tought the
> best
> > idea is to make a rotary group, I don4t know if i can do it simpler
> > the point is I followed a multink config and it seems I do not have the
> > correct config in my routers, but i am changing the config but I dont
> > reach the point...
> > I am just trying to make a isdn call interface bri 0 numbertocall
> > I attach the router configs as well removing the phone numbers:
> >
> > SMACI4500#sh is st bri 0
> > Global ISDN Switchtype = basic-net3
> > ISDN BRI0 interface
> > dsl 0, interface ISDN Switchtype = basic-net3
> > Layer 1 Status:
> > ACTIVE
> > Layer 2 Status:
> > TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> > Layer 3 Status:
> > 0 Active Layer 3 Call(s)
> > Active dsl 0 CCBs = 0
> > The Free Channel Mask: 0x80000003
> > Number of L2 Discards = 0, L2 Session ID = 2
> > Total Allocated ISDN CCBs = 0
> > TSMACI4500#
> > 00:15:27: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 64 changed
> to
> > dow
> >
> > Current configuration : 2114 bytes
> > !
> > version 12.1
> > service config
> > no service single-slot-reload-enable
> > service tcp-keepalives-out
> > service timestamps debug uptime
> > service timestamps log uptime
> > service password-encryption
> > !
> > hostname TSMACI4500
> > !
> > boot system flash
> > enable secret 5 $1$GGuR$HuTvavLwqhsLdXVKf9of8/
> > enable password 7 140317061C55737B76
> > !
> > username xxx password 7 09414F1B1A0A191B
> > !
> > !
> > !
> > !
> > ip subnet-zero
> > --More--  no ip domain-lookup
> > !
> > isdn switch-type basic-net3
> > !
> > !
> > !
> > interface Serial0
> > no ip address
> > no ip mroute-cache
> > shutdown
> > !
> > interface Serial1
> > no ip address
> > no ip mroute-cache
> > shutdown
> > no cdp enable
> > !
> > interface Serial2
> > no ip address
> > no ip mroute-cache
> > shutdown
> > no cdp enable
> > !
> > --More--  interface Serial3
> > no ip address
> > no ip mroute-cache
> > shutdown
> > no cdp enable
> > !
> > interface BRI0
> > description Marconi 913393319
> > bandwidth 64
> > no ip address
> > encapsulation ppp
> > no ip mroute-cache
> > shutdown
> > dialer idle-timeout 180
> > dialer load-threshold 5 outbound
> > dialer-group 1
> > isdn switch-type basic-net3
> > ppp authentication chap
> > ppp chap hostname marconi
> > !
> > interface BRI1
> > description Marconi 913393324
> > no ip address
> > --More--   no ip mroute-cache
> > isdn switch-type basic-net3
> > no cdp enable
> > !
> > interface BRI2
> > description Marconi 913393335
> > no ip address
> > no ip mroute-cache
> > shutdown
> > isdn switch-type basic-net3
> > no cdp enable
> > !
> > interface BRI3
> > description Marconi 913393337
> > no ip address
> > no ip mroute-cache
> > shutdown
> > isdn switch-type basic-net3
> > no cdp enable
> > !
> > interface FastEthernet0
> > ip address 172.16.23.190 255.255.255.224
> > no ip mroute-cache
> > --More--   half-duplex
> > no cdp enable
> > !
> > interface Dialer1
> > ip address 192.168.1.253 255.255.255.252
> > encapsulation ppp
> > dialer pool 1
> > dialer string
> > dialer string
> > dialer string
> > dialer string
> > dialer-group 1
> > ppp authentication chap
> > ppp chap hostname
> > ppp chap password 7 11041817141D0505
> > ppp multilink
> > !
> > ip classless
> > ip route 0.0.0.0 0.0.0.0 Dialer1
> > no ip http server
> > !
> > access-list 101 permit ip any any
> > dialer-list 1 protocol ip list 101
> > --More--  no cdp run
> > !
> > !
> > line con 0
> > exec-timeout 0 0
> > line aux 0
> > line vty 0 4
> > password 7 140317061C5079062B26273D31
> > login
> > !
> > end
> >
> >
> >
> >
> >
> > and the other router:
> > ersion 12.1
> > no service single-slot-reload-enable
> > service timestamps debug uptime
> > service timestamps log uptime
> > service password-encryption
> > !
> > hostname MOMARCI4500
> > !
> > enable secret 5 $1$oL1F$Oqn65ynJNCFEmwi.8.SHR/
> > enable password 7 120D001A025A555478
> > !
> > username marconi password 7 082C4D5C0A160B1E
> > !
> > !
> > !
> > !
> > ip subnet-zero
> > no ip domain-lookup
> > !
> > isdn switch-type basic-net3
> > !
> > !
> > !
> > interface Ethernet0
> > ip address 172.16.131.32 255.255.254.0
> > media-type 10BaseT
> > no cdp enable
> > !
> > interface Ethernet1
> > no ip address
> > shutdown
> > media-type 10BaseT
> > !
> > interface Ethernet2
> > no ip address
> > shutdown
> > media-type 10BaseT
> > !
> > interface Ethernet3
> > no ip address
> > shutdown
> > media-type 10BaseT
> > !
> > interface Ethernet4
> > no ip address
> > shutdown
> > media-type 10BaseT
> > !
> > interface Ethernet5
> > no ip address
> > shutdown
> > media-type 10BaseT
> > !
> > interface Serial0
> > no ip address
> > shutdown
> > !
> > interface Serial1
> > no ip address
> > shutdown
> > !
> > interface Serial2
> > no ip address
> > shutdown
> > !
> > interface Serial3
> > no ip address
> > shutdown
> > !
> > interface BRI0
> > description marconi
> > no ip address
> > no ip mroute-cache
> > dialer pool-member 1
> > isdn switch-type basic-net3
> > !
> > interface BRI1
> > description marconi
> > no ip address
> > shutdown
> > isdn switch-type basic-net3
> > !
> > interface BRI2
> > description marconi
> > no ip address
> > shutdown
> > isdn switch-type basic-net3
> > !
> > interface BRI3
> > description marconi
> > no ip address
> > shutdown
> > isdn switch-type basic-net3
> > !
> > interface Dialer0
> > no ip address
> > no cdp enable
> > !
> > interface Dialer1
> > ip address 192.168.0.254 255.255.255.252
> > encapsulation ppp
> > dialer pool 1
> > dialer string
> > dialer string
> > dialer string
> > dialer string
> > dialer-group 1
> > no cdp enable
> > ppp chap hostname xxx
> > ppp chap password 7 121404051104020D
> > !
> > router eigrp 1
> > passive-interface Dialer1
> > network 172.16.0.0
> > auto-summary
> > no eigrp log-neighbor-changes
> > !
> > ip classless
> > ip route 0.0.0.0 0.0.0.0 172.16.131.254
> > ip route 172.16.23.160 255.255.255.224 Dialer1 permanent
> > no ip http server
> > !
> > access-list 101 permit ip any any log-input
> > dialer-list 1 protocol ip list 101
> > no cdp run
> > !
> > !
> > line con 0
> > exec-timeout 180 0
> > password 7 04560A140C714247
> > login
> > line aux 0
> > line vty 0 4
> > password 7 13081600085C0A23
> > login
> > !
> > end
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> --
> Ivan



This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:59 GMT-3