From: Petr Lapukhov (petrsoft@gmail.com)
Date: Sat Apr 22 2006 - 12:13:40 GMT-3
Hi Bryant,
1) You probably have tclsh running
2) As per DocCD:
.....
PBR for IPv6 will match packets using the *match ipv6 address* command in
the
associated PBR route map.
Packet match criteria are those criteria supported by IPv6 access lists, as
follows:
a) Input interface
b) *Source* IPv6 address (using a *prefix list* or a standard or extended
access list [ACL])
c) Destination IPv6 address (standard or extended ACL)
......
So when you match prefix-list, you actually match source-address.
Petr
2006/4/22, Bryant, Paul M <paul.m.bryant@uk.verizonbusiness.com>:
>
> Hi all
>
> I have just been playing with PBR using IPV6.
>
> Two question arose
>
> 1) When I try to add
>
> Set ipv6 next-hop
>
> I get "wrong # args: should be "set varName ?newValue?"
>
> IOS version
> flash:c2600-adventerprisek9-mz.123-14.T6.bin
>
> 2)Secondly, it is not clear to me how the match ip add works with ipv6
> prefix lists. I can see how it works with ipv6 acl. But if the prefix
> matches by the ipv6 prefix the source prefix for pbr or the destination.
> The
> config guide doesn't clarify?
>
> Thanks in advance.
>
>
>
>
> Paul Bryant
> Senior Network Engineer
> IDN
> Telephone + 44 118 905 5353
> Vnet 419 5353
> Mobile + 44 7879 692 163
>
> Verizon and MCI are now operating as Verizon Business
>
> This e-mail is strictly confidential and intended only for use by the
> addressee unless otherwise indicated.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:58 GMT-3