From: Bryant, Paul M (paul.m.bryant@uk.verizonbusiness.com)
Date: Sat Apr 22 2006 - 12:05:19 GMT-3
Hi all
I have just been playing with PBR using IPV6.
Two question arose
1) When I try to add
Set ipv6 next-hop
I get "wrong # args: should be "set varName ?newValue?"
IOS version
flash:c2600-adventerprisek9-mz.123-14.T6.bin
2)Secondly, it is not clear to me how the match ip add works with ipv6
prefix lists. I can see how it works with ipv6 acl. But if the prefix
matches by the ipv6 prefix the source prefix for pbr or the destination. The
config guide doesn't clarify?
Thanks in advance.
Paul Bryant
Senior Network Engineer
IDN
Telephone + 44 118 905 5353
Vnet 419 5353
Mobile + 44 7879 692 163
Verizon and MCI are now operating as Verizon Business
This e-mail is strictly confidential and intended only for use by the
addressee unless otherwise indicated.
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:58 GMT-3