From: Chris Lewis (chrlewiscsco@gmail.com)
Date: Wed Apr 19 2006 - 10:08:57 GMT-3
It looks like you are using the physical interfaces for teh frame relay
connection between BB1 and R6. If so, I would have expected to see frame
relay map statements in those interfaces.
You won't get multicast connectivity until unicast is working!
Chris
On 4/19/06, Vikram Dadlaney <vdadlaney@gmail.com> wrote:
>
> Hi Shameen,
>
> From your topology it doesn't seem like you have any alternate paths. Can
> you confirm this? Your OIL list on R6 is empty hence you are not
> forwarding
> the multicast traffic. Can you post the the configs of R2. Also have you
> tried clearing all your neighbors. The 'ip mroute' influences the RPF
> check.
> If you have multicast enabled on all interfaces than it should not matter
> but say you have an alternate path and you haven't enabled multicast on
> that
> but the unicast routing table is choosing that path than you will have a
> RPF
> failure. Please do let us know if the problem has been resolved. HTH.
>
> Regards,
>
> Vikram
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:58 GMT-3