From: Jens Petter (jenseike@start.no)
Date: Wed Apr 19 2006 - 07:52:24 GMT-3
Yes i understand this, but this is going to be a routet net with redundancy
so does this tunnel transport layer 3 routing information also?
Mvh
Jens Petter Eikeland
Senior systemkonsulent
mob: 99039602
-----Original Message-----
From: Alexei Monastyrnyi [mailto:alexeim@orcsoftware.com]
Sent: 19. april 2006 12:34
To: Jens Petter Eikeland
Cc: 'Cisco certification'
Subject: Re: help on vlan Q
Jens,
as Vishal Patel said, L2TPv3 will make your VLANs happy across the
non-trunking media... Just set up a L2TPv3 tunnel from R1 to R2. Or you
are asking for "out-of-the box" recipe?
A.
on 19/04/2006 12:07 Jens Petter Eikeland wrote:
> topology
>
>
>
> sw1--R1--modem(as router)--ppp---R2--sw2
>
>
>
> If I on R1 make a tunnel to R2 will this vlan information from sw1 be
> maintained on when packet arive at sw2?
>
>
>
> JP
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:58 GMT-3