RE: Backup Interface

From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Mon Apr 17 2006 - 11:25:25 GMT-3


You're welcome, Naveed.

________________________________

From: Naveed Khan [mailto:naveed_k@hotmail.com]
Sent: Mon 4/17/2006 1:22 PM
To: Schulz, Dave; CCIEin2006
Cc: Cisco certification
Subject: Re: Backup Interface

Yes I got it. I thought it just like backup interface command. Thankx a lot.
Naveed

        ----- Original Message -----
        From: Schulz, Dave <mailto:DSchulz@dpsciences.com>
        To: Naveed Khan <mailto:naveed_k@hotmail.com> ; CCIEin2006
<mailto:ciscocciein2006@gmail.com>
        Cc: Cisco certification <mailto:ccielab@groupstudy.com>
        Sent: Monday, April 17, 2006 7:18 AM
        Subject: RE: Backup Interface

        You apply it directly in the access list....you must use the extended
acl....

        access-list 100 permit ip any any time-range WORK_HRS

        interface s0/0
        ip access-group 100 in

        HTH,
        Dave

________________________________

        From: Naveed Khan [mailto:naveed_k@hotmail.com]
        Sent: Mon 4/17/2006 1:13 PM
        To: CCIEin2006; Schulz, Dave
        Cc: Cisco certification
        Subject: Re: Backup Interface

        Hi
        I understand that I could setup time-range but how I apply that.
        Naveed

                ----- Original Message -----
                From: CCIEin2006 <mailto:ciscocciein2006@gmail.com>
                To: Schulz, Dave <mailto:DSchulz@dpsciences.com>
                Cc: Naveed Khan <mailto:naveed_k@hotmail.com> ; Cisco certification
<mailto:ccielab@groupstudy.com>
                Sent: Monday, April 17, 2006 7:11 AM
                Subject: Re: Backup Interface

                Okay, but thats more for a dialer interface, how do you apply it to a point
to point circuit?

                On 4/17/06, Schulz, Dave <DSchulz@dpsciences.com> wrote:

                        Take a look at time-ranges applied to an ACL. HTH.

                        Dave

                        ________________________________

                        From: nobody@groupstudy.com on behalf of Naveed Khan
                        Sent: Mon 4/17/2006 12:13 PM
                        To: Cisco certification
                        Subject: Backup Interface

                        Hello
                        Any clue for this scenario?
                        Configure RouterA and RouterB so the serial interface is not up during
                        working
                        hours of 5pm and 6am.
                        Naveed

                        _______________________________________________________________________
                        Subscription information may be found at:
                        http://www.groupstudy.com/list/CCIELab.html

                        _______________________________________________________________________
                        Subscription information may be found at:
                        http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3