From: Chris Lewis (chrlewiscsco@gmail.com)
Date: Fri Apr 14 2006 - 09:28:32 GMT-3
Depending on the overall requirements, you might want to look at using a
demand circuit to keep an adjacency and not send hello's.
Chris
On 4/14/06, Mohammed Shameen Abdul Jabbar <ccie.xpert@gmail.com> wrote:
>
> Thanks,
> If the question in the lab states the ," OSPF hello packets should not
> be sent out interfaces that connect to stub networks" , is it enough
> to configure the "passive-interface command under the router ospf
> process for the interface connected to stubs or is there any other
> alternative methods that we have to keep in mind.
>
> regards
>
> On 4/13/06, Ivan <ivan@iip.net> wrote:
> >
> > In RIP: router don't send out routing update from passive-interface. But
> it
> > can receive update to this interface. Therefore it will have actual
> routing
> > table.
> >
> > > I know that the "passive-interface command under router ospf process
> will
> > > not allow ospf hellos to be sent over the interface,in effect not
> forming
> > > adjacencies.
> > > I would like to know, what is the effect of "passive-interface"
> command in
> > > RIP process.
> > >
> > > Thankyou for all your replies.
> > >
> > > reagards
> > > shamin
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > --
> > Ivan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3