From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Apr 13 2006 - 10:39:38 GMT-3
Are there multiple ABRs from area 2 to area 0?
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Abu Bucker
> Sent: Thursday, April 13, 2006 3:58 AM
> To: Groupstudy
> Subject: ospf inter-area route summarization
>
> i am trying to summarize the following routes a.b.8.0/24 to
a.b.11.0/24 as
> a.b.8.0/22 on ABR using *area 2 range a.b.8.0 255.255.252.0* (The
network
> a.b.8.0 /24 to a.b.11.0 /24 belong to area 2)
>
> Only this summarised route should be advertised to other routers in
area 0
> and routers in other areas connected to area 0, but i find the
individual
> routes a.b.8.0 /24 to a.b.11.0/24 as well as the summarised route
> a.b.8.0/22
> in the routing table of other routers.
>
> Anyone got a clue to this, why its happening? I want to see only
> summarised
> route in the routing table of other backbone routers and routers in
other
> areas.
>
> Regards,
> Abu Bucker
>
>
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3