From: Chris Lewis (chrlewiscsco@gmail.com)
Date: Sun Apr 09 2006 - 18:37:36 GMT-3
Thanks Jason,
A good tip, I was however asking about a debug, as Scott had indicated that
a debug command would help.
Cheers
Chris
On 4/9/06, Plank, Jason <JPlank@concordefs.com> wrote:
>
> R2>show ip prot
>
> Routing Protocol is "eigrp 2"
>
> Outgoing update filter list for all interfaces is not set
>
> Incoming update filter list for all interfaces is not set
>
> Default networks flagged in outgoing updates
>
> Default networks accepted from incoming updates
>
> *EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0*
>
> EIGRP maximum hopcount 100
>
> EIGRP maximum metric variance 1
>
> Redistributing: eigrp 2
>
> Automatic network summarization is not in effect
>
> Maximum path: 4
>
> Routing for Networks:
>
> 172.1.1.0/24
>
> Routing Information Sources:
>
> Gateway Distance Last Update
>
> Distance: internal 90 external 170
>
>
>
> No enable access is needed for the above command.
>
>
>
> -------------------
>
> Jason Plank
>
> Network Engineer
>
> 101 Bellevue Parkway
>
> Wilmington, DE 19809
>
> E-mail: JPlank@concordefs.com
>
> Phone: 302-793-5913
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Chris Lewis
> Sent: Sunday, April 09, 2006 4:26 PM
> To: Joel Desaulniers
> Cc: CCIE CCIE; ccielab@groupstudy.com
> Subject: Re: EIGRP K-Mismatch values ?
>
>
>
> Knowing the values for MTU BW DLY etc. will not help in this case, the
> issue
>
> is with a mismatch of the K values, indicating that either R5 or BB have
> had
>
> the metric weights configured to be something different than the default.
>
>
>
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr_
>
> c/ipcprt2/1cfeigrp.htm#wp1001020
>
>
>
> Shows a second case of when this error message can be displayed, and that
>
> will only happen if you have a version of code that does not support the
>
> EIGRP goodbye message talking to one that does.
>
>
>
> If the issue is R5 has default metric weights, BB has had them changed and
>
> there is no enable access to BB, I don't actually know of a debug on R5
> that
>
> will display the K values configured on the BB router, if anyone can
> provide
>
> that info, it would be great.
>
>
>
> Chris
>
>
>
> On 4/8/06, Joel Desaulniers <joeldesaulniers@gmail.com> wrote:
>
> >
>
> > Try this on BB:
>
> >
>
> > Sh int s0/0
>
> > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
>
> > reliability 255/255, txload 1/255, rxload 1/255
>
> >
>
> > It should give you the BW, Delay, Reliability, Load, and MTU.
>
> >
>
> > Regards,
>
> >
>
> > Joel Desaulniers
>
> > Network Analyst
>
> > CCNP, CCNA
>
> >
>
> >
>
> > -----Original Message-----
>
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>
> > CCIE CCIE
>
> > Sent: Saturday, April 08, 2006 2:11 PM
>
> > To: ccielab@groupstudy.com
>
> > Subject: EIGRP K-Mismatch values ?
>
> >
>
> > Hi,
>
> > R5 -------eigrp -----BB
>
> > Both of R5 and BB have mismatch K-vlaues So the Eigrp will not
>
> > work.From R5 how can i get the K-vlaues of BB?
>
> >
>
> > Regards,
>
> >
>
> >
>
> > ---------------------------------
>
> > Make free worldwide PC-to-PC calls. Try the new Yahoo! Canada Messenger
>
> > with Voice
>
> >
>
> > _______________________________________________________________________
>
> > Subscription information may be found at:
>
> > http://www.groupstudy.com/list/CCIELab.html
>
> >
>
> > _______________________________________________________________________
>
> > Subscription information may be found at:
>
> > http://www.groupstudy.com/list/CCIELab.html
>
>
>
> _______________________________________________________________________
>
> Subscription information may be found at:
>
> http://www.groupstudy.com/list/CCIELab.html
>
> ------------------------------
>
>
> *
> The information in this message may be proprietary and/or
> confidential, and protected from disclosure. If the reader of this
> message is not the intended recipient, or an employee or agent
> responsible for delivering this message to the intended recipient,
> you are hereby notified that any dissemination, distribution or
> copying of this communication is strictly prohibited. If you have
> received this communication in error, please notify First Data
> immediately by replying to this message and deleting it from your
> computer.
> *
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3