From: Plank, Jason (JPlank@concordefs.com)
Date: Sun Apr 09 2006 - 17:42:17 GMT-3
R2>show ip prot
Routing Protocol is "eigrp 2"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
172.1.1.0/24
Routing Information Sources:
Gateway Distance Last Update
Distance: internal 90 external 170
No enable access is needed for the above command.
-------------------
Jason Plank
Network Engineer
101 Bellevue Parkway
Wilmington, DE 19809
E-mail: JPlank@concordefs.com
Phone: 302-793-5913
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Chris Lewis
Sent: Sunday, April 09, 2006 4:26 PM
To: Joel Desaulniers
Cc: CCIE CCIE; ccielab@groupstudy.com
Subject: Re: EIGRP K-Mismatch values ?
Knowing the values for MTU BW DLY etc. will not help in this case, the issue
is with a mismatch of the K values, indicating that either R5 or BB have had
the metric weights configured to be something different than the default.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr
_
c/ipcprt2/1cfeigrp.htm#wp1001020
Shows a second case of when this error message can be displayed, and that
will only happen if you have a version of code that does not support the
EIGRP goodbye message talking to one that does.
If the issue is R5 has default metric weights, BB has had them changed and
there is no enable access to BB, I don't actually know of a debug on R5 that
will display the K values configured on the BB router, if anyone can provide
that info, it would be great.
Chris
On 4/8/06, Joel Desaulniers <joeldesaulniers@gmail.com> wrote:
>
> Try this on BB:
>
> Sh int s0/0
> MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> reliability 255/255, txload 1/255, rxload 1/255
>
> It should give you the BW, Delay, Reliability, Load, and MTU.
>
> Regards,
>
> Joel Desaulniers
> Network Analyst
> CCNP, CCNA
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> CCIE CCIE
> Sent: Saturday, April 08, 2006 2:11 PM
> To: ccielab@groupstudy.com
> Subject: EIGRP K-Mismatch values ?
>
> Hi,
> R5 -------eigrp -----BB
> Both of R5 and BB have mismatch K-vlaues So the Eigrp will not
> work.From R5 how can i get the K-vlaues of BB?
>
> Regards,
>
>
> ---------------------------------
> Make free worldwide PC-to-PC calls. Try the new Yahoo! Canada Messenger
> with Voice
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3