From: Petr Lapukhov (petrsoft@gmail.com)
Date: Sun Apr 09 2006 - 03:30:28 GMT-3
Hello Dave,
maybe you forgot to issue "spanning-tree portfast default"
global command?
HTH
Petr
2006/4/9, Schulz, Dave <DSchulz@dpsciences.com>:
>
> It was my understanding that when you configure "spanning-tree portfast
> bpdufilter default" global command...that all connected interfaces are put
> in
> portfast mode, unless they receive a bpdu, which at this point, it revert
> out
> of portfast.
>
> Testing this out, I configured a router on a switchport (routing, so as
> not to
> send bpdu's)....then, after setting the global command of spanning-tree
> portfast bpdufilter default.....
>
> running the show spanning-tree details.....the details only show that it
> is a
> shared port and not in portfast. However, I can go to the port
> specifically
> and enable portfast (and it shows up). If portfast is truly enabled, then
> is
> it possible to view in another place? Or, am I missing something?
>
> Dave
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3