From: xprtofnet (xprtofnet@yahoo.com)
Date: Sat Apr 08 2006 - 22:06:47 GMT-3
distance 150 1.1.1.1 0.0.0.0 <-set distance 150 for
routes Generated by router-id 1.1.1.1
m2c
--- Roberto Fernandez <rofernandez@us.telefonica.com>
wrote:
> Friends,
>
> First thanks for the good inputs on the RSPAN
> subject, now a new
> question.
>
> It's there some caveat or limit to use the
> "distance" command under OSPF
> process?
>
> I've tried different variants and the only that
> seems to work is when I
> change the distance for all routes. When I try to
> filter based on the
> route source/access-list pair, it doesn't work for
> me. I'm posting my
> configuration in hope someone finds a mistake, since
> this looks straight
> forward...
>
>
*****************************************************************
>
> ***Routing table***
>
> Rack7R5(config)#do sh ip ro os
> 142.7.0.0/16 is variably subnetted, 6 subnets,
> 2 masks
> O 142.7.0.3/32 [110/64] via 142.7.0.3,
> 00:00:24, Serial0/0
> O 142.7.0.4/32 [110/64] via 142.7.0.4,
> 00:00:24, Serial0/0
> O 142.7.34.0/24 [110/74] via 142.7.0.4,
> 00:00:24, Serial0/0
> [110/74] via 142.7.0.3,
> 00:00:24, Serial0/0
> 150.7.0.0/16 is variably subnetted, 4 subnets,
> 2 masks
> O 150.7.8.8/32 [110/11] via 142.7.58.8,
> 00:00:24, Ethernet0/1
> O 150.7.4.4/32 [110/65] via 142.7.0.4,
> 00:00:24, Serial0/0
> O 150.7.3.3/32 [110/65] via 142.7.0.3,
> 00:00:24, Serial0/0
>
>
> ***OSPF process***
>
> router ospf 7
> router-id 150.7.5.5
> log-adjacency-changes
> network 142.7.0.0 0.0.0.255 area 345
> network 142.7.58.0 0.0.0.255 area 0
> network 150.7.5.0 0.0.0.255 area 345
> distance 111 142.7.0.3 0.0.0.0 11
>
> ***access-list***
>
> access-list 11 permit 142.7.34.0 0.0.0.255
>
>
>
************************************************************************
> ****
>
>
> Any input welcomed...
>
>
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3