From: Faryar Zabihi \(fzabihi\) (fzabihi@cisco.com)
Date: Fri Apr 07 2006 - 17:14:53 GMT-3
This answers all your questions(I am sure the link will be broken so
copy/paste url). Look under "RTP Header-Compression Keywords"
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_
chapter09186a00805f284e.html#wp1085471
Faryar Zabihi
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hash Aminu
Sent: Friday, April 07, 2006 12:23 PM
To: Cisco certification
Subject: frame-relay header compression
Dear GS ,
Go some little issues with the abouve command.
1. if you are to compress all RTP header in a PPPoFR , do you apple
the command under the virtual-template of on the physical
interface(assuming
you want to compress RTP header on all VCs)
ie
VIPER(config)#int s0
VIPER(config-if)#frame-relay ip rtp header-compression
Or
VIPER(config-if)#int virtual-template 1
VIPER(config-if)#ip rtp he
VIPER(config-if)#ip rtp header-compression
1. Second issue is that after configuring on the Virtual-Template
interface a show command yields the following result
VIPER(config-if)#do sh run int virtual-tem 1
Building configuration...
Current configuration : 148 bytes
!
interface Virtual-Template1
ip address 192.168.0.222 255.255.255.0
ip rtp header-compression iphc-format
end
what is this thing iphc-format ? never seen it , can someone give me a
better explation of refer me to some reference.
TIA
Hashiru
-- B.Eng, MCP,CCNA, CCNP
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3