From: Hash Aminu (hashng@gmail.com)
Date: Fri Apr 07 2006 - 16:23:10 GMT-3
Dear GS ,
Go some little issues with the abouve command.
1. if you are to compress all RTP header in a PPPoFR , do you apple
the command under the virtual-template of on the physical
interface(assuming
you want to compress RTP header on all VCs)
ie
VIPER(config)#int s0
VIPER(config-if)#frame-relay ip rtp header-compression
Or
VIPER(config-if)#int virtual-template 1
VIPER(config-if)#ip rtp he
VIPER(config-if)#ip rtp header-compression
1. Second issue is that after configuring on the Virtual-Template
interface a show command yields the following result
VIPER(config-if)#do sh run int virtual-tem 1
Building configuration...
Current configuration : 148 bytes
!
interface Virtual-Template1
ip address 192.168.0.222 255.255.255.0
ip rtp header-compression iphc-format
end
what is this thing iphc-format ? never seen it , can someone give me a
better explation of refer me to some reference.
TIA
Hashiru
-- B.Eng, MCP,CCNA, CCNP
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3