From: John Aitken (john.aitken@gmail.com)
Date: Thu Apr 06 2006 - 06:38:59 GMT-3
Great stuff guys, problem solved - caused by an NM1E-2W module which I'd
swapped in when rejiging my lab to conform to a workbook - now looking good,
many thanks.
On 4/6/06, malcolm.price@lanbase.com <malcolm.price@lanbase.com> wrote:
>
> John,
>
> It may be one of the RAM modules or flash.
>
> Try booting via TFTP to prove the flash is ok, and, perhaps try booting a
> base image which doesn't reference extended areas of the RAM i.e. isn't so
> heavy on RAM usage.
>
> If the base image loads, try swapping RAM chips out.
>
> Do you have any modules in the router which may be suspect ?,
>
> Regards,
> Malcolm
> IE#10607
>
> Original Message:
> -----------------
> From: John Aitken john.aitken@gmail.com
> Date: Thu, 6 Apr 2006 09:12:10 +0100
> To: ccielab@groupstudy.com
> Subject: Help, my lab 3640 has died
>
>
> Hey guys, anyone got any ideas on possible solutions to this problem - the
> 3640 in my lab has died. Looks like some sort of hardware thing but I've
> no
> idea where. I've tried xmodem and sending a new IOS to the flash but same
> problem. Any help greatly appreciated, even if it's just to say stop
> wasting
> your time on it and write it off as a bad cause :(
>
> Basically keeps cycling with the same messages, output follows:
>
> System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> C3600 processor with 32768 Kbytes of main memory
>
> Main memory is configured to 64 bit mode with parity disabled
>
>
> program load complete, entry point: 0x80008000, size: 0x585310
>
> Self decompressing the image :
>
>
############################################################################
> #
>
>
############################################################################
> #
>
>
############################################################################
> #
>
>
############################################################################
> #
>
>
############################################################################
> #
>
>
############################################################################
> #
> #############################
> [OK]
>
>
> Smart Init is disabled. IOMEM set to: 15
>
>
> Using iomem percentage: 15
>
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and Computer
> Software clause at DFARS sec. 252.227-7013.
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California 95134-1706
>
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3640-I-M), Version 12.1(5)T9, RELEASE SOFTWARE
> (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2001 by cisco Systems, Inc.
> Compiled Sat 23-Jun-01 08:46 by cmong
> Image text-base: 0x60008950, data-base: 0x60A28000
>
>
> %ERR-1-GT64010: Fatal error, Parity error on master read
> cause=0x0110E083, mask=0x0CD01F00, real_cause=0x00100000
> bus_err_high=0x00000000, bus_err_low=0x31000000,
> addr_decode_err=0x14000470
> r0 = FFFFFFFF r1 = FFFFFFFF r2 = 0 r3 = 60E70000 r4 = 0
> r5 = B r6 = 0 r7 = 1 r8 = 0 r9 = 1
> r10 = 0 r11 = 0 r12 = 0 r13 = 0 r14 = 0
> r15 = 0 r16 = 0 r17 = C100 r18 = 0 r19 = 3401C101
> r20 = 0 r21 = 60439028 r22 = FFFFFFFF r23 = FFFF00FF r24 = 0
> r25 = 0 r26 = 0 r27 = 1C r28 = 0 r29 = 0
> r30 = 0 r31 = 4 r32 = FFFFFFFF r33 = FFFFFFFF r34 = FFFFFFFF
> r35 = FFFFFFFF r36 = FFFFFFFF r37 = FFFFFFFF r38 = FFFFFFFF r39 = FFFFFFFF
> r40 = FFFFFFFF r41 = FFFFFFFF r42 = FFFFFFFF r43 = FFFFFFFF r44 = FFFFFFFF
> r45 = FFFFFFFF r46 = FFFFFFFF r47 = FFFFFFFF r48 = 0 r49 = 0
> r50 = 0 r51 = 0 r52 = 0 r53 = 3041F001 r54 = 0
> r55 = 100000 r56 = FFFFFFFF r57 = FFFFFFFF r58 = 0 r59 = 61039C38
> r60 = FFFFFFFF r61 = FFFFFFFF r62 = 0 r63 = 60474E74
> sreg = 3401C103 mdlo_hi = 0 mdlo = 0
> mdhi_hi = 0 mdhi = 0 badvaddr_hi = FFFFFFFF
> badvaddr = FFFFFFFF cause = FFFFFFFF epc_hi = 0
> epc = 60474E78 err_epc_hi = FFFFFFFF err_epc = FFFFFFFF
>
> %ERR-1-FATAL: Fatal error interrupt, reloading
> err_stat=0x10
>
>
> === Flushing messages (00:00:17 UTC Mon Mar 1 1993) ===
>
> Queued messages:
> 00:00:10: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram
> No fault history 0xFFFFFFFF. Need 11.1 (2) or higher ROM
>
> -Traceback= 0 0
>
>
> *** System received a System Error ***
>
> signal= 0x16, code= 0x0, context= 0x6102bf98
>
> PC = 0x6043904c, Cause = 0x420, Status Reg = 0x34018002
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3