From: Henry Dziewa (henryd31@comcast.net)
Date: Tue Apr 04 2006 - 18:52:02 GMT-3
I don't have the T3 in them, but tested with Smartbits passing traffic
between the GE interfaces and here are some results:
Mb/s Packet Size CPUUtil
20 64-byte 90%
34 100-byte 90%
500 1500-byte 90%
Now, this is straight L3 to L3 interface, basic config. The router could push
bit higher than these numbers running up to 100% but it could give you an
idea of what to expect. It would seem for "typical" internet traffic you'd
have no issue as far as performance.
-------------- Original message ----------------------
From: security <ccie13831@gmail.com>
> Does anyone have a 2851 in production with a T3 card? Can a 2851 support T3
> line speed without services? Just running OSPF and static routes? Thanks a
> whole lot!
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3