Re: IOS Image

From: Bryan Fetzer (cciebfetzer@gmail.com)
Date: Tue Apr 04 2006 - 16:00:30 GMT-3


It all depends on the config you need. My www.internetworkexpert.com
backbone routers consist of all 2500's.

CCIEin2006 wrote:
> Whoa - I did not know this. So if I were to create a poor-man's CCIE lab,
> could I use all 2500's? What models would you recommend?
>
> On 4/4/06, Petr Lapukhov <petrsoft@gmail.com> wrote:
>
>> yes, OSPFv3, RIPng, BGP :))
>>
>> Actually, all you need for ipv6 in real lab :)
>>
>> it does not support ipv6 multicast / ipv6 mobility, though.
>>
>> HTH
>> Petr
>>
>> 2006/4/4, CCIEin2006 <ciscocciein2006@gmail.com>:
>>
>>
>>> Wow - I didn't know you could run IPv6 on a 2500...does it also support
>>> OSPFv3?
>>>
>>>
>>> On 4/4/06, Petr Lapukhov <petrsoft@gmail.com > wrote:
>>>
>>>> Hi,
>>>>
>>>> you shoud use
>>>>
>>>> 12.2(15)T IP Plus
>>>> or
>>>> 12.3 IP Plus
>>>>
>>>> you will need 16mb flash and 16bm DRAM
>>>>
>>>> HTH
>>>> Petr
>>>>
>>>> 2006/4/4, b1t AvAtAr <b1t.avatar@gmail.com>:
>>>>
>>>>> Hi Guys, please could anyone support me on this One, Which IOS Image
>>>>>
>>>>> should
>>>>> I use to support IPV6 in this 2522 Router
>>>>>
>>>>> FRS-BB2#conf te
>>>>> Enter configuration commands, one per line. End with CNTL/Z.
>>>>> FRS-BB2(config)#interface Loopback0
>>>>> FRS-BB2(config-if)# ip address 220.20.3.1 255.255.255.0
>>>>> FRS-BB2(config-if)# ipv6 address 2001:220:20:3::1/64
>>>>> ^
>>>>> % Invalid input detected at '^' marker.
>>>>>
>>>>> FRS-BB2(config-if)# ipv6 rip RIPng enable
>>>>> ^
>>>>> % Invalid input detected at '^' marker.
>>>>>
>>>>> FRS-BB2(config-if)#!
>>>>> FRS-BB2(config-if)#interface Loopback1
>>>>> FRS-BB2(config-if)# ip address 222.22.2.1 255.255.255.0
>>>>> FRS-BB2(config-if)# ipv6 address 2001:222:22:2::1/64
>>>>> ^
>>>>> % Invalid input detected at '^' marker.
>>>>>
>>>>> FRS-BB2(config-if)# ipv6 rip RIPng enable
>>>>> ^
>>>>> % Invalid input detected at '^' marker.
>>>>>
>>>>> FRS-BB2(config-if)#!
>>>>> FRS-BB2(config-if)#interface Loopback3
>>>>> FRS-BB2(config-if)# ip address 205.90.31.1 255.255.255.0
>>>>> FRS-BB2(config-if)# ipv6 address 2001:205:90:31::1/64
>>>>> ^
>>>>> % Invalid input detected at '^' marker.
>>>>>
>>>>> FRS-BB2(config-if)# ipv6 rip RIPng enable
>>>>> ^
>>>>> % Invalid input detected at '^' marker.
>>>>>
>>>>> FRS-BB2(config-if)#!
>>>>> FRS-BB2(config-if)#interface Loopback51515151
>>>>> FRS-BB2(config-if)# ip address 51.51.51.51 255.255.255.255
>>>>> FRS-BB2(config-if)# ipv6 address 2001:51:51:51::51/64
>>>>> ^
>>>>> % Invalid input detected at '^' marker.
>>>>>
>>>>> FRS-BB2(config-if)#
>>>>> FRS-BB2(config-if)#do show ver
>>>>> ^
>>>>> % Invalid input detected at '^' marker.
>>>>>
>>>>> FRS-BB2(config-if)#^Z
>>>>> FRS-BB2#show ver
>>>>> Cisco Internetwork Operating System Software
>>>>> IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(27), RELEASE
>>>>>
>>>> SOFTWARE
>>>>
>>>>> (fc3)
>>>>> Copyright (c) 1986-2004 by cisco Systems, Inc.
>>>>> Compiled Tue 02-Nov-04 22:01 by kellmill
>>>>> Image text-base: 0x0307D390, data-base: 0x00001000
>>>>>
>>>>> ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
>>>>> BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
>>>>>
>>>> RELEASE
>>>>
>>>>> SOFTWARE (fc1)
>>>>>
>>>>> FRS-BB2 uptime is 5 days, 14 hours, 35 minutes
>>>>> System returned to ROM by reload
>>>>> System image file is "flash:/c2500-js-l.122-27.bin"
>>>>>
>>>>> cisco 2522 (68030) processor (revision M) with 14336K/2048K bytes of
>>>>> memory.
>>>>> Processor board ID 14512161, with hardware revision 00000003
>>>>> Bridging software.
>>>>> X.25 software, Version 3.0.0.
>>>>> SuperLAT software (copyright 1990 by Meridian Technology Corp).
>>>>> TN3270 Emulation software.
>>>>> Basic Rate ISDN software, Version 1.1.
>>>>> 1 Ethernet/IEEE 802.3 interface(s)
>>>>> 2 Serial network interface(s)
>>>>> 8 Low-speed serial(sync/async) network interface(s)
>>>>> 1 ISDN Basic Rate interface(s)
>>>>> 32K bytes of non-volatile configuration memory.
>>>>> 16384K bytes of processor board System flash (Read ONLY)
>>>>>
>>>>> Configuration register is 0x2102
>>>>>
>>>>>
>>>>>
>>>> _______________________________________________________________________
>>>>
>>>>> Subscription information may be found at:
>>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>>
>>>> _______________________________________________________________________
>>>>
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3